ENIGMA Z SHOWER DOOR & TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any
“Enigma Z” Rev.1 Ver.1 05/2013 10 11. Parallel the Stationary glass (02) to the shower base or threshold. Measure the distance from the side wal
“Enigma Z” Rev.1 Ver.1 05/2013 11 13. Attach two Roller assemblies (04) to the Glass door (05). Suspend the door by hanging the Roller assemblie
“Enigma Z” Rev.1 Ver.1 05/2013 12 15. Apply Waterproof silicone at both ends of the Anti-splash threshold (15), around the Guide block (12) and
“Enigma Z” Rev.1 Ver.1 05/2013 13 Product Maintenance To insure long lasting life for your acrylic back walls, wipe them off after each use
DREAMLINE™EXCLUSIVELIMITEDWARRANTYASOFMAY6,2013Thiswarrantyextendsonlytotheoriginalowner/end‐userforhouseholduseonlyandisnottr
“Enigma Z” Rev.1 Ver.1 05/2013 14 TEL: 866-731-2244 FAX: 866-227-1533 WWW.BATHAUTHORITY.COM For more informatio
“Enigma Z” Rev.1 Ver.1 05/2013 2Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the
“Enigma Z” Rev.1 Ver.1 05/2013 3Detailed Diagram of Shower Door Components 12345678910111213151716191418 Packing List 01 Door stopper 2pcs 1
“Enigma Z” Rev.1 Ver.1 05/2013 4Shower Door Installation 1. Measure the distance between two finished walls. This distance is marked as “W”.
“Enigma Z” Rev.1 Ver.1 05/2013 5 3. Install the Upper guide rail (03) to the Stationary glass (02) with the Glass brackets (07) and tighten
“Enigma Z” Rev.1 Ver.1 05/2013 6 4. Place the Stationary glass (02) on the preinstalled shower base or threshold and butt it up against the wal
“Enigma Z” Rev.1 Ver.1 05/2013 7 6. Drill the holes for the Wall bracket (19) using Ø 5/16 drill bit and insert the Wall anchors (9b). Drill th
“Enigma Z” Rev.1 Ver.1 05/2013 8 8. Place the Guide Block (12) on the shower base or the threshold and place the Stationary glass (02) back in
“Enigma Z” Rev.1 Ver.1 05/2013 9 10. Upper guide rail (03) must be leveled horizontally. Adjust Guide rail bracket (08) using hex key on both en
Commentaires sur ces manuels