“PRISMLUX” Ver 3 Rev 2 12/2014
4. Outline the position of the Wall brackets (11) on the
wall.
Set the Stationary glasses (01) and (03) aside.
Remove the Wall bracket from the Stationary glass and
by placing it back to the outlined position mark the
drilling holes on the wall.
Drill the holes in the wall using Ø 5/16” drill bit and
insert the Wall anchors (07) for the Wall brackets.
Fasten the Wall brackets to the wall using the Round
head screw ST4.2×55 (09).
See Fig. 5 for details.
Fig. 5
5. Place the Stationary glasses (01) and (03) back into
the designated position, assemble the Wall brackets
(14) and tighten the bolts.
See Fig. 6 and Fig. 7 for details.
Fig. 6
Commentaires sur ces manuels