DreamLine DL-6619C-07CL Guide d'installation télécharger pdf (Page 11)

“Enigma-X” Rev.2 Ver.5 08/2013

11. Parallel the Stationary glass (02) to the shower base or

threshold. Measure the distance from the side wall to

the far edge of the Guide block (12).

This distance will be “X”.

Cut the Anti-splash threshold (15) to the size of

X−

½”.

Insert one side of the Anti-splash threshold fully into

the Guide block and cover the other side with the

Threshold bracket (16).

Parallel the Anti-splash threshold to the front edge of

the shower base or threshold and mark the drilling hole

through the Threshold bracket.

See Fig. 13 for details.

Fig. 13

12. Drill the holes for the Guide block

(12) and the Threshold bracket

(16) using Ø 1/8” drill bit.

Apply silicone to the bottom of the

Anti-splash threshold (15) and

place it back into the designated

position. Fasten the Guide block

and the Threshold bracket to the

shower base or threshold with the

Round head screw ST4.2×25 (17).

Cover the holes with the provided

decorative plugs.

See Fig. 14 for details.

Fig. 14

Ø 1/8”

Ø 1/8"

X-1/2"

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Pas de commentaire

DreamLine DL-6619C-07CL Guide d'installation Page 11